Linksys EtherFast® II Series
5.Type a packet count number from 1 to 999, or type 0 for an infinite packet count. Press Enter.
6.Move to Size <mbytes> and press Enter. The Enter Packet Size screen will appear.
7.Type the packet size, from 0 to 1500, then press Enter.
8.Move to Timeout <sec> and press Enter. The Enter Timeout screen will appear.
9.Type a timeout value, from 0 to 999, and press Enter.
10.When you finish specifying the ping parameters, press Esc to start ping- ing a remote IP address.
11.Press Esc again to return to the L3 IP Networking screen.
10/100 Managed
BRIDGING
If you select Bridging from the Advanced Management screen, the following Bridging Parameters screen will appear.
1.To change the aging time, highlight Aging Time <seconds> and press Enter. The following prompt will ask you to enter a bridge aging period, in seconds. Enter a new aging period and press the Enter key. Enter 0 for no aging.
2.To change the flood limit for all ports, highlight Flood Limit for All ports <pkt/s>, the following prompt will ask you to enter the flood limit,
in packets per second. Enter a a new flood limit and press the Enter key. Enter 0 for no limit.
3. Press the Esc key until you return to the desired screen.
56 | 57 |