Linksys NSLU2 manual Administration Tab Status, Properties, System

Chapter 3

Configuration

Properties

This area of the screen allows you to change the properties for the user selected in the list above.

Name  The user’s name must be composed of alphanumeric symbols not exceeding 15 characters in length.

Comment  Any comment about the user must be composed of alphanumeric symbols not exceeding 15 characters in length.

Password  The password must be composed of alphanumeric symbols not exceeding 15 characters in length.

Verify Password  Re-enter the password here.

Clicking the box next to Create Private Folder (Share) provides this user with a private folder on the drive. Clicking the box beside Enable Disk Quota allows you to set a limit on how much storage space that user has in terms of megabytes of data. Enter the amount in the space provided.

When you’re finished, click Save to save your changes. If you wish to establish this user as new, click Save as New User. You can also clear the date by clicking Clear Form. For more information about this screen, click Help.

User Membership

This screen allows you to check which Groups this user is a member of, and to add or revoke membership. Select the user in the left-hand list for granting access to the group in the right-hand list. Click the right-pointing arrows and then the items will appear in the right-hand list.

User Membership

User Name  This shows the name of the User being modified.

Member of  This shows the Groups that this user is in.

Other Groups  This shows all other Groups of which the user is not a member.

To Add Membership to a Group

Select the Group or Groups in the right-hand column, and then click << . Multiple Groups can be selected by holding down the CTRL key while selecting.

To Revoke Membership to a Group

Select the Group or Groups in the left-hand column, and then click >>. Multiple Groups can be selected by holding down the CTRL key while selecting.

Click Close when finished. Click Help for more information.

Administration Tab > Status

Administration > Status

The Status screen allows you to check the Storage Link’s details and status.

System

Server Name  The Server’s current name. This name will be shown in “Network Neighborhood” or “My Network Places”.

IP Address  This displays the Storage Link’s current IP Address.

Current Status  Indicates the Storage Link’s current status. This will usually state “Ready”. If the Server is not available, the message will say why the Server is not available (e.g., Scandisk in Progress.)

•• Click Shutdown Now to immediately shut down the Storage Link. This will break all existing connections. None of your data will be saved.

Network Storage Link for USB 2.0 Disk Drives 6