Chapter 3
Configuration
Chapter 3:
Configuration
For advanced users, a
Internet Explorer Address Bar
After you press Enter, the Web Management Home Page will appear.
NOTE: The Storage Link is designed to function properly after using the Setup Wizard. This chapter is provided solely for those who wish to perform more advanced configuration or monitoring.
Home Tab
Click the disk’s links to access their contents. If you click the link to User Login (Private Data), you will be required to enter your User Name and Password. Clicking the Disk (Public Data) or Flash (Public Data) options allows you to view the contents of either the USB hard disks or flash drives that are attached to the Storage Link.
Home Tab
User Password Tab
Password Change
From the User Password tab, any user can change their Storage Link password. Simply enter your user name in the User Name field. This should be the same as your network logon. Then, enter your Storage Link password. Next, enter your new password in the New Password field. This new password can be up to 15 hexadecimal characters
long. Enter this new password again in the Confirm new password field and click Save to save this new password.
User Password Tab
Click Save to save any changes, Cancel to clear all changes, or Help to get more information about anything on this screen.
Administration Tab > System
Administration > System
From the Administration > System screen, you will be able to change some of the Storage Link’s general and IP settings. These settings, broken up into four categories, are described below.
Network Storage Link for USB 2.0 Disk Drives | 4 |
