Once the adapter is connected to the network

Linksys PAP2 Devices Administrator’s Guide

STOP!: Be sure to identify the correct device prior to provisioning. The service will not function if the incorrect provisioning string is used.

2.Connect the Linksys PAP2 to your network by connecting one end of a network cable to the Ethernet port and the other end to your broadband router.

Once the adapter is connected to the network

3.If you have the:

PAP2-NA or PAP2T-NA, continue with the next step.

PAP2T-R, proceed to Step 13.

4.Using a standard telephone wire (RJ-11), connect a telephone to the PHONE 1 port on the back of your PAP device.

5.Dial **** (four stars), followed by 110#. The IP address is announced.

6.Write down the IP address.

7.From a PC on the same network as the PAP device, login to the PAP device Web Interface by opening your web browser and entering http://IP address into the address field and pressing <Enter>.

8.Click the Admin Login link.

5

Page 7
Image 7
Linksys manual Once the adapter is connected to the network, PAP2-NA or PAP2T-NA, continue with the next step