65
ProConnect II
®Series
Use the following procedure to modify the selections shown:
1. With the Spanning Tree Protocolfield highlighted, press Enter. The fol-
lowing choices will appear (see next page).
2. Select either Disabledor Enabledand press Enter. Your selection will
appears next to Spanning Tree Protocol.
3. Use the Down Arrowkey to move to Bridge Priority and press Enter.
The Enter Bridge Priority screen will appear.
64
Layer 2 Management 4-Port Gigabit Ethernet Switch
4. Type a decimal number for the bridge priority and press Enter. The deci-
mal value you typed will appear next to Bridge Priority.
5. Use the Down Arrowkey to move to Hello Time <sec> and press Enter.
The Enter Hello Time screen will appear.
6. Type a decimal number for the hello time and press Enter. The decimal
value you typed will appear next to Hello Time.
7. Press the Esc key to return to the Spanning Tree Protocolscreen.
Spanning Tree Port States
Highlight Spanning Tree Port States in the Spanning T r ee Protocol screen and
press the Enter key. A Spanning Tree Port Statesscreen similar to the follow-
ing will appear. This screen displays read-only values. When you finish, press
the Esc key until you return to the desired screen.