From each of these screens, you are able to:
• Hold down the Shiftkey and press the “+” key to add a specific MAC
address to be filtered.
• Press the “-” (hyphen) key to delete a specific MAC address from being
filtered. Since there is no precautionary message that appears before you
delete a specific MAC address, be sure you want to delete the address
before you begin.
• Press “S” to search through the list of MAC addresses in the static filtering
database. The static filtering database maximum capacity is 64.
When you finish, press the Esc key until you return to the desired screen.
SPANNING TREE FUNCTIONS
If you select Spanning Tree from the Advanced Management screen, the
Spanning Tree Protocolscreen will appear.
Spanning Tree Protocol Configurations
Highlight Spanning Tree Configurationsin the Spanning Tree Protocol screen
and press the Enter key. A Spanning Tree Protocol Configurationscreen sim-
ilar to the following will appear. The top half of this screen displays read-only
values. The bottom half, starting with Spanning Tree Protocol, is user config-
urable. Use the Up Arrowand Down Arrow keys to highlight a field, then
press Enter to change the value. When you finish, press the Esc key until
you return to the desired screen.
63
ProConnect II
®Series
STATIC FILTERING
If you select Static Filteringfrom the Advanced Management screen, the follow-
ing Static Filteringscreen will appear, with Source MAC Address highlighted.
From the Static Filteringscreen, you can select Source MAC Addresses
Destination MAC Addressesand MAC Address In-Filters for static filtering by
highlighting one of these options and pressing the Enter key.
If you select Source MAC Addressand press Enter, the SRC MAC Out-Filter
screen will appear.
If you select Destination MAC Addressand press Enter, the DST MAC Out-
Filterscreen will appear.
If you select MAC Address In-Filters, the MAC Address In-Filtersscreen will
appear.
62
Layer 2 Management 4-Port Gigabit Ethernet Switch