1� Installation
NOTE: Before attaching the camera extension or swivel head, the stand base can be mounted in a permanent location by using three screws to secure the stand base to the desired location..
A. The Camera stand can be connected two different ways:
Attach the stand base to the camera extension and attach the camera extension to the swivel head..
You can connect the swivel head directly to the stand base if the extension isn’t necessary..
B. Connect the camera stand to the bottom of the camera.. Adjust the camera to the appropriate viewing position..
Once the camera is positioned properly, secure the camera in place by tightening the locknut..
Camera Extension | Locknut |
Stand Base | Swivel Head |
OR
Swivel Head
Stand Base
Locknut
