Linksys RV082 manual Appendix B Installing the Linksys VPN Client

10/100 8-Port VPN Router

Appendix B: Installing the Linksys VPN Client

When using your PC to log onto the Router from remote locations, you’ll want to use the Linksys QuickVPN Client.

Installing this Client takes just a few steps, provided below.

1.Insert the RV082 User Guide CD into your PC’s CD-ROM drive.

2.Click the Start button, select Run, and, in the window that appears, type D:\Linksys_QuickVPN_1028.exe (where D: is your CD-ROM drive). Then, click the OK button. The Client will immediately begin installing the software onto your hard drive at C:\Program Files\Linksys\Linksys VPN Client.

3.The License Agreement screen will appear. Read the agreement and click the Yes button to proceed. Clicking the Back or No buttons will close the installation.

Figure B-1: Linksys VPN License Agreement

4.The Linksys VPN Client software will now be installed. When it is finished, an screen will appear to tell you that the installation is complete. Click the Finish button.

Figure B-2: Linksys VPN Installation Complete

Appendix B: Installing the Linksys VPN Client 78