Chapter
| Linksys One Ready Communications Solution |
4 | Select Edit to make changes. When your changes are complete, press the Esc key to |
return to the Action menu, and select Save to save your changes. |
File Management
The File Management screen allows you to upload or download files, such as the startup configuration, boot, or image file, using a TFTP server.
NOTE: There are two software images
on the Ethernet switch: Image 1 and Image 2. When you copy an image to the switch via TFTP, the inactive image is replaced. When you copy an image to the switch via the console port, the active image is replaced.
Upgrade / Backup
Select Edit to change the settings. Specify the source and destination of the file, the file name, and the IP address of the file server where the upgrade file is being downloaded, When your changes are complete, press the Esc key to return to the Action menu, and select Execute to upload or download the designated file.
Active Image
The Active Image screen shows information about the active image file and the image file that will be active after reboot.
Chapter 4: Console Configuration | 27 |
Configuring the Switch through the Console or Telnet Interface |
|
