Linksys SGE2000 manual Restore System Default Settings, Reboot System, Stack Configuration

Restore System Default Settings

To set the Ethernet switch back to the factory default settings, select Restore System Default Settings and press the Enter key. You will be asked if you want to continue. Press the y key to restore the default settings, or press the n key to cancel.

NOTE: Restoring default settings from the console, web, or Linksys One portal interfaces resets all values except stacking configuration (stacking mode, stacking ports, and auto-numbering settings are NOT reset). To reset stacking configuration, use the hardware reset button on the front of the Ethernet switch.

Reboot System

Select Reboot System and press the Enter key if you want to restart the Ethernet switch. You will be asked if you want to continue. Press the y key to reboot the Ethernet switch, or press the n key to cancel. After the Ethernet switch has rebooted, the Switch Main Menu screen will appear.

Stack Configuration

Select Stack Configuration to specify the Stack ID for the Ethernet switch. By default, ID numbers are automatically assigned to each device.

Back to main menu

Select Back to main menu and press the Enter key if you want to return to the Switch Main Menu screen.

Port Status

The Port Status screen displays the port connection status.

To view the status of the ports:

1. On the Switch Main Menu screen, select Port Status.

Linksys One Ready Communications Solution

4

Chapter

TIP: Use the up or down arrow keys to scroll through all the ports on the Ethernet switch.

28	Chapter 4: Console Configuration
	Configuring the Switch through the Console or Telnet Interface