Set the serial port settings as follows | Linksys SGE2000 guide

Chapter

Linksys One Ready Communications Solution

4	6.	On the Connect To screen, select a port to communicate with the Ethernet switch.
	6.
	7.	Set the serial port settings as follows:
		• Bits per second: 115200
		•	Data bits: 8
		•	Parity: None
		•	Stop bits: 1
		•	Flow control: None

Then, click the OK button.

Chapter 4: Console Configuration	15
Configuring the HyperTerminal Application

Image 19

Linksys SGE2000 manual Set the serial port settings as follows