Chapter

Linksys One Ready Communications Solution

5Web Utility Configuration

Overview

The Linksys Switch provides a complete web-based utility to configure the Ethernet switch.

This utility is accessible through your web browser.

Use the navigation window, located on the left side of the web-based utility, to view various functions of the Ethernet switch.

NOTE: The Ethernet switch is setup by default to obtain its IP address via DHCP on the default VLAN 100.

Accessing the Web-based Utility

To access the web-based utility, enter the IP address of the Ethernet switch to the address field

of your web browser. For example: type http://192.168.100.20 orLinksys One Portal https://192.168.100.20 if the IP address of the Ethernet switch is 192.168.100.20. The IP

address of the Ethernet switch is determined by DHCP, so you’ll need to find its address using the Console configuration or the Linksys One Administrator screen.

If your Ethernet switch is part of a Linksys One system, the easiest way to manage it is with the Linksys One Portal — available only on the Linksys One Services Router. Refer to the Customer Premises Equipment Administration Guide for more details on the Linksys One Portal.

Viewing Online Help

The Web Utility has complete online help functionality for each screen. To access on-line help for a particular screen, click on the Help button located on the right side of the screen.

Chapter 5: Web Utility Configuration

31

Overview

 

Page 35
Image 35
Linksys SGE2000 manual Web Utility Configuration, Accessing the Web-based Utility, Viewing Online Help