Chapter 4 | Advanced Configuration |
Rx Frames Displays the number of frames received on the port since the device was last refreshed.
Tx Errors Displays the number of transmitted packets with errors that have occurred on the port since the device was last refreshed.
Rx Errors Displays the number of received packets with errors that have occurred on the port since the device was last refreshed.
Tx Broadcast Displays the number of good broadcast packets transmitted on the port since the device was last refreshed.
Rx Broadcast Displays the number of good broadcast packets received on the port since the device was last refreshed.
Statistics > IGMP Status
From the IGMP Status screen, you will see the IGMP Status for each VLAN interface.
Statistics > IGMP Status
VLAN ID Displays the VLAN ID .
Querier Indicates the IGMP router is active or idle.
Queries Transmitted Displays the number of queries that have been transmitted.
Queries Received Displays the number of queries that have been received.
v1 Reports Displays the number of IGMP v1 report packets that have been received by the Switch.
v2 Reports Displays the number of IGMP v2 report packets that have been received by the Switch.
v2 Leaves Displays the number of IGMP v2 leave packets that have been received by the Switch.
Multicast > IGMP Settings
When IGMP Snooping is enabled globally, all IGMP packets are forwarded to the CPU. The CPU analyzes the incoming packets and determines:
•The ports that want to join which Multicast groups and issue the IGMP join packet
•The ports that have Multicast routers generating IGMP queries
Ports requesting to join a specific Multicast group issue an IGMP report, specifying that Multicast group is accepting members. This results in the creation of the Multicast filtering database.
Multicast > IGMP Settings
NOTE: All functions listed on the Multicast
>IGMP Settings screen require “Enable IGMP Snooping” to be enabled before settings will take effect.
Enable IGMP Snooping Indicates if IGMP Snooping is enabled on the device.
Enable Unregistered IP Multicast Flooding Indicates if Unregistered IP Multicast Flooding is enabled on the device.
VLAN ID Displays the VLAN ID number.
Enable IGMP Snooping Indicates if IGMP Snooping is enabled on each VLAN interface.
Enable IGMP Querying Indicates if IGMP Querying is enabled on each VLAN interface.
Click Save Settings to save any changes.
Admin > Ping
You can use a ping to see if another site on the network can be reached. Ping sends ICMP echo request packets to another node on the network.
Admin > Ping
13 |
