Chapter 3: Connecting the 24-Port 10/100 + 1-Port Gigabit Switch

+ 1 miniGBIC

Overview

our Network Layout

This chapter will explain how to connect network devices to the Switch. For an example of a typical network configuration, see the application diagram shown in Figure 3-1.

Figure 3-1

When you connect your network devices, make sure you don’t exceed the max- imum cabling distances, which are listed in the following table:

Maximum Cabling Distances

From

To

Maximum Distance

Switch

Switch or Hub*

100 meters (328 feet) 1

 

 

 

Hub

Hub

5 meters (16.4 feet) 1

 

 

 

Switch or Hub

Computer

100 meters (328 feet) 1

 

 

 

*A hub refers to any type of 100Mbps hub, including regular hubs and stackable hubs. A 10Mbps hub connected to another 10Mbps hub can span up to 100 meters (328 feet).

Connecting Network Devices

To connect network devices to the Switch, follow these instructions:

1.Make sure all the devices you will connect to the Switch are powered off.

2.Connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch.

Figure 3-2

3.Connect the other end to a PC or other network device.

4.Repeat steps 2 and 3 to connect additional devices.

5.If you are using the Gigabit port, connect a Category 5e Ethernet network cable to the Gigabit port on the Switch, and connect the other end to a Gigabit server or other network device.

6.If you are using the mini-GBIC port, then connect the mini-GBIC module to the mini-GBIC port. For detailed instructions, refer to the module’s doc- umentation.

Note: The mini-GBIC port is compatible with two types of mini- GBIC modules, 850 nm and 1310 nm.

7.Connect the supplied power cord to the Switch’s power port, and plug the other end into an electrical outlet.

8.Power on the devices connected to the Switch. Each active port’s corre- sponding LED will light up on the Switch.

Proceed to the following section, “Placement Options.”

4

5

Page 5
Image 5
Linksys SR2246 manual + 1 miniGBIC, Overview Our Network Layout, Connecting Network Devices

SR2246 specifications

The Linksys SR2246 is a robust and efficient device designed to meet the networking demands of small to medium-sized businesses. As part of the Linksys lineup of networking solutions, the SR2246 stands out due to its versatility, performance, and ease of management.

One of the main features of the Linksys SR2246 is its 24-port capacity, which allows for extensive connectivity options. This device is equipped with 24 Ethernet ports capable of supporting 10/100/1000 Mbps speeds, enabling seamless data transfer and communication across various connected devices. This makes it an ideal choice for organizations looking to connect multiple workstations, printers, and servers without sacrificing speed or efficiency.

The SR2246 utilizes advanced switching technologies that enhance both performance and management capabilities. With support for both auto-negotiation and auto-MDI/MDI-X, the switch facilitates easy plug-and-play installation, automatically adapting to different networking configurations. This feature minimizes network downtime, enabling a hassle-free setup for users who may not possess extensive technical knowledge.

Power over Ethernet (PoE) support is another significant characteristic of the Linksys SR2246, allowing the device to deliver both data and power through the same Ethernet cable. This feature is beneficial in scenarios where powering devices like IP cameras or VoIP phones can be a challenge, as it eliminates the need for additional electrical outlets or power adapters.

In terms of security, the SR2246 incorporates robust features to protect the network from unauthorized access and potential threats. VLAN (Virtual Local Area Network) support enables administrators to segment the network, enhancing security measures and improving overall network performance by reducing broadcast traffic.

Furthermore, the SR2246 offers a user-friendly web-based management interface that allows for easy configuration and monitoring of network performance. This interface is designed to assist network administrators in maximizing efficiency by providing insights into traffic patterns, device connectivity, and overall system health.

In summary, the Linksys SR2246 is a powerful, reliable, and user-friendly switch that meets the needs of modern businesses. With its 24 ports, gigabit capabilities, PoE support, VLAN functionality, and intuitive management interface, it stands as a prime choice for organizations looking to build a robust networking infrastructure. Whether deploying in an office environment or utilizing in a more demanding commercial setting, the SR2246 delivers exceptional performance that companies can depend on.