Linksys SR2246 manual Leds, Front Panel LEDs and Ports, System, 1-24, Gigabit, Back Panel Port

Chapter 2: Getting to Know the 24-Port 10/100 + 1-Port Gigabit Switch + 1 miniGBIC

Front Panel LEDs and Ports

Figure 2-1

The LEDs and network ports are located on the front panel of the Switch. All network ports are independent, so you can use all of them simultaneously.

LEDS

System	Green. The System LED will light up when the Switch is
	powered on.
1-24	Green. Each LED will light up when there is a connection
	made through its corresponding port. It will flash when there
	is activity on its corresponding port.
G1	Green. The G1 LED will light up when there is a connection
	made through the Gigabit port. It will flash when there is
	activity on the Gigabit port.
G2	Green. The G2 LED will light up when there is a connection
	made through the miniGBIC port. It will flash when there is
	activity on the miniGBIC port.

Ports

1-24	These 10/100 ports are connection points for PCs and other
	network devices, such as additional switches.
Gigabit	This 10/100/1000 port is a connection point for a network
	device, such as a Gigabit server.

mini-GBICThe mini-GBIC (gigabit interface converter) port is a con- nection point for a mini-GBIC module, so the Switch can be uplinked via fiber to another switch. The mini-GBIC port is compatible with two types of modules, 850 nm and 1310 nm.

Back Panel Port

Figure 2-2

The power port is located on the back panel of the Switch.

(power)	The power port is where you will connect the included power
	cord.

2 3