Philips MCM5 Connecting the speakers, Connecting the AC power cord, Connections, Helpful Hint

Connections

Step 2: Connecting the speakers

Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into the terminal as shown.

Helpful Hint:

–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

–Do not connect more than one speaker to any one pair of +/- speaker terminals.

Step 3: Connecting the AC power cord

"AUTO INSTALL Ð PRESS PLAY" may appear on the display panel when the AC power cord is plugged into the power outlet for the first time.

Press ÉÅ on the main unit to store all available radio stations or press Ç to exit (refer to ÒTuner OperationsÓ).

Step 4: Inserting batteries into the remote control

3

1

2

1Open the battery compartment cover.

2Insert two batteries type R06 or AA, following the indications (+-) inside the compartment.

3Close the cover.

Using the remote control to operate the system

1Aim the remote control directly at the remote sensor (iR) on the main unit.

2Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD,TUNER).

3Then select the desired function (for example

ÉÅ, í, ë).

CAUTION!

–Remove batteries if they are exhausted or will not be used for a long time.

–Do not use old and new or different types of batteries in combination.

–Batteries contain chemical substances, so they should be disposed of properly.

English

11