Disc Operations
English
Programming the disc tracks
Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order.
CD
2
PROGRAM
Checking the programme
1Stop playback and press í or ë repeatedly.
2Press ÉÅ to start playback from the current programmed track.
Clearing the programme
● Stop playback, then press Ç to clear the |
1
3 , 5
programme. |
4
6
M I C R O S Y S T E M | 7 |
1Load the desired disc on the disc tray (refer to ÒLoading discÓ).
OR |
Press the OPEN/CLOSE 0 button of the |
disc tray. |
➜PROG disappears from the display and " PROGRAM CLEARED" appears.
Helpful Hint:
–If the system is disconnected from the power supply or you switch to other source mode, the programme will be erased.
2Press CD to select a disc.
3Press PROGRAM to start programming.
➜ PROG starts flashing.
4Press í or ë repeatedly to select the desired track.
●For MP3 disc, press à / á and í / ë to select the desired album and title for programming.
5Press PROGRAM to store.
●Repeat steps 4~5 to select other tracks.
➜ If you attempt to programme more than 99 tracks, "PROGRAM FULL" appears.
6To start programme play, press ÉÅ.
7To stop playback or to end the programming, press Ç once.
➜ PROG stays and the programme mode remains active.
Helpful Hints:
–If the total playing time reached 100 minutes or if one of the programmed tracks has a number greater than 30, then
–The system will exit programming mode if no button is pressed within 20 seconds.
16
