Linksys SRW224 manual Getting to Know the Switch, LEDs, Ports

24-port 10/100 + 2-Port Gigabit Switch with WebView

Chapter 2: Getting to Know the Switch

The Front Panel

The Switch's LEDs and ports are located on the front panel.

	Figure 2-1: Front Panel
LEDs
System	Green. Lights to indicate the power is being supplied to the Switch.
LINK/ACT	Green. Lights to indicate a functional network link through the corresponding port (1
	through 24) with an attached device. Blinks to indicate that the Switch is actively sending
	or receiving data over that port.
Ports
LAN (1-24)	The LAN (Local Area Network) ports connect to Ethernet network devices, such as other
	switches or routers.

Gigabit1 /Gigabit2 / The switch is equipped with two Gigabit ports and a mini GBIC port that is shared with

miniGBIBGigabit Port 2. If Gigabit Port 2 is being used, the minGBIC port cannot be used. They link to

high-speed network peripheral system or clients at speeds of up to 1000Mbps.

Gigabit	Green. Lights to indicate the port is working in Gigabit mode.
Console	The Console port is where you connect a serial cable from a PC’s serial port.

Chapter 2: Getting to Know the Switch 4

The Front Panel