Linksys SRW224 manual QoS Configuration, Logout Tab

24-port 10/100 + 2-Port Gigabit Switch with WebView

QoS Configuration

This screen allows you to configure the QoS. Select the QoS Mode of High Low = 3:1, Disable QoS Priority, High Empty Then Low, High Low = 3:1, High Low = 5:1, High Low = 7:1 from the drop-down menu. Select the Static Port Ingress Priority of High or Low from the drop-down menu, for the port you want to configure. Select Off for the port to remain unchanged. For 802/1p Priority [7-0], select from 0 to 7, then select High or Low from the drop-down menu.

Click Apply to save the changes.

Figure 5-16: QoS Configuration

Logout Tab

Click Logout OK to logout. Click back to go to the previous screen.

Figure 5-17: Logout Tab

Chapter 5: Configuring the Switch through the Web Utility 26

VLAN Tab