Bluetooth USB Adapter
I know the service I want to use and I want to find a Bluetooth device that provides that service.
After you select this option from the Wizard’s menu and click the Next button, the Bluetooth Service Selection screen will appear. Select the service that you need and click the Next button.
NOTE: For descriptions of services provided by Bluetooth devices, see that device’s documentation.
Next, the Bluetooth Device Selection screen will appear. This screen will list those devices that provide the service you’ve requested. Chose the device to which you wish to connect and click the Next button to continue.
The Setup Wizard Completion Screen will appear next. The name of the service will appear at the top of the screen and you can personalize this if you wish. If you wish to further configure the service you’ve selected, click the Configure button. In most cases, further configuration is not required. To start the connection upon completing the Wizard, select the Start the Connection option. A shortcut to this device will be placed in the My Bluetooth Places folder. To create more shortcuts in addition to the one created by default and restart the Wizard, select the Create a shortcut and then restart this wizard so that I can create additional shortcuts option. Click the Back button if you with to go back a step, the Cancel button if you wish to leave the Wizard without saving your changes, or the Finish button to complete the Wizard.
The Adapter will then try to connect to that device. If a PIN code is required for security, you will be notified. At this point, you will be asked for your PIN code as well as the PIN code for the other Bluetooth device before the connection can be completed.
Chapter 3: Using the Bluetooth USB Adapter
Figure 3-5: The Bluetooth Service Selection Screen
Figure 3-6: The Bluetooth Device Selection Screen
Figure 3-7: The Setup Wizard Completion Screen
10
The Bluetooth Setup Wizard
