Bluetooth USB Adapter

The Discovery tab.

From this tab, you can specify the types of Bluetooth devices the Adapter will access.

The Adapter automatically searches for new Bluetooth devices every ten minutes. You can select how often the Adapter will discover new Bluetooth devices by clicking the box beside Look for other Bluetooth devices and filling in how often this search will be done.

If you want all Bluetooth devices to be reported, select Report all Bluetooth devices from the pull-down menu. If you want to limit those Bluetooth devices that the Adapter reports, select Report only selected Bluetooth devices from the pull-down menu. Then, in the box below that, you can add Bluetooth devices (by clicking the Add Device button) or delete Bluetooth devices (by clicking the Delete button) that will be reported.

Then, click the Cancel button if you wish to leave the Wizard without saving your changes, the Apply button to save the settings, leaving the Bluetooth Configuration screen open, or the OK button to save these settings and close the Bluetooth Configuration screen. You can also press the Help button for more information.

Figure 3-16: Bluetooth Configuration - Discovery tab

Chapter 3: Using the Bluetooth USB Adapter

15

Advanced Cofiguration

Page 19
Image 19
Linksys USBBT100 manual Bluetooth Configuration Discovery tab