Cisco Systems DPC/EPC2325 DOCSIS Configuring Your Wireless Access Point Parameters

How Do I Configure My DOCSIS Residential Gateway?

Configuring Your Wireless Access Point Parameters

Use the Setup Wireless - Basic page to configure your wireless access point (WAP) parameters, including SSID and channel number.

Note: If you are not familiar with the advanced settings detailed in this section, contact your service provider before you attempt to change any of the residential gateway default wireless basic settings.

Click Basic in the Wireless section of the Setup page to access the Setup Wireless - Basic page.

Setup Wireless - Basic Page

The following illustration is an example of the Setup Wireless - Basic page showing the factory default settings.

Setup Wireless - Basic Page Description

This section describes the section headings and fields descriptions of the Setup Wireless - Basic page.

Note: If you make changes in the Setup Wireless - Basic page, click Apply to apply and save your wireless basic settings.

Field Name	Description
Access Point	Allows you to turn the access point on the gateway on or
	off

Service Set Identifier (SSID)

The name assigned to this access point

Note: The factory default for the SSID field should contain the last 6 digits of the cable modem’s MAC address as found on the label.

4024320 Rev A 79