Cisco Systems DPC/EPC2325 DOCSIS Configuring Wireless Access Point Access Control

How Do I Configure My DOCSIS Residential Gateway?

Configuring Wireless Access Point Access Control

Use the Setup Wireless - Access Control page to configure your configure your wireless access point access control.

Note: If you are not familiar with the advanced settings detailed in this section, contact your service provider before you attempt to change any of the residential gateway default wireless advanced settings.

Click Access Control in the Wireless section of the Setup page to access the Setup Wireless - Access Control page.

Setup Wireless Access Control Page

The following illustration is an example of the Setup Wireless - Access Control page.

Setup Wireless - Access Control Page Description

This section describes the section headings and field descriptions of the Setup Wireless - Access Control page.

	Field Name	Description
	Access restriction	When encryption is enabled, this selection allows you
		to choose one of the following options from the drop-
		down list:
		ƒ Disable (factory default)–No access restrictions
		based on MAC address of wireless access devices
		ƒ Allow–Allows wireless access to only the MAC
		addresses listed in the Access List
		ƒ Deny–Denies wireless access to only the MAC
		address listed in the Access List
4024320 Rev A		93