Cisco Systems DPC/EPC2325 DOCSIS Setup Basic Settings IP Management Page Description

How Do I Configure My DOCSIS Residential Gateway?

Setup Basic Settings - IP Management Page Description

The following tables provide a description of the fields within the Setup Basic Settings - IP Management page.

Field Name	Description
DHCP Server	Allows you to enable or disable the DHCP server
	in the residential gateway
Starting Local Address	Displays the starting address used by the built-in
	DHCP server to distribute Private LAN IP
	addresses. In the example shown, addresses
	between 2 and 9 can be used for devices on your
	Private LAN that require fixed IP addresses such
	as printers or a device assigned as a DMZ host
	Note: The LAN IP address ending in 1 is reserved
	for the internal gateway server. The LAN IP
	address ending in 255 is also reserved and should
	not be used for CPE devices
Number of CPEs	Enter the maximum number of devices allowed to
	connect to the Private LAN.
	Note: The Factory Default is 245. The maximum
	number of devices is 253. This is the combined total
	of addresses reserved for static IP addresses, for
	example, the sum of the IP addresses between 2
	and the value entered in the Starting Local Address
	field and the value entered in the Number of CPEs
	field.
	Note: The sum of the value entered in the Starting
	Local Address field and the value entered in the
	Number of CPEs field must always be 255 or less.
DHCP Client Lease Info	Displays the MAC address, IP Address, Subnet
	Mask, Duration and Expiration date of all devices
	issued an IP address by the built-in DHCP server.
	This field also displays the current system time and
	date
WINS Addresses	Allows you to manually enter Windows Internet
	Name Server (WINS) server addresses

4024320 Rev A 39