Cisco Systems DPC/EPC2325 DOCSIS Subscribe to High-Speed Internet Service? on page 19 for

How Do I Configure My DOCSIS Residential Gateway?

	Field Name	Description
	WPA Pre-Shared Key	Allows you to set a WPA Pre-Shared key. Enter a text
		string in this field. The text string or phrase is used to
		generate a unique set of encryption keys for your network.
		Use this string to set up wireless devices in your network.
		The factory default security key is the 9-digit serial number
		of the gateway. For example: 20167792. See How Do I
		Subscribe to High-Speed Internet Service? (on page 19) for
		the location of the serial number on the label.
		ƒ The PSK can be either a text string or a 64 character
		hexadecimal number.
		ƒ The text string must be an ASCII character string with
		a minimum of 8 characters but no more than 63.
		Note: Not all wireless adapter devices support PSK. For
		these devices, you must enter the encryption keys exactly
		as they appear in the in wireless gateway fields in the
		preceding illustration of the Setup Wireless Security page.
	RADIUS Server	Allows you to enter the IP address of the RADIUS server
		used for authentication and encryption key derivation.
		ƒ This field is used with 802.1x and WPA Network
		Authentication.
		ƒ The factory default for this field is 0.0.0.0.
	RADIUS Port	Determines the port number of the RADIUS server. The
		port number is usually 1812 (factory default) or 1645,
		depending on the server used.
		This field is used with 802.1x and WPA Network
		Authentication.
	RADIUS Key	Allows you to set the Shared Secret key for your RADIUS
		connection.
		ƒ The factory default for this field is empty.
		ƒ This field is used with 802.1x and WPA Network
		Authentication.
	Group Key Rotation	Allows you to set the WPA Group Key Rotation Interval in
	Interval	seconds. This only applies when WPA or WPA2 Network
		Authentication is enabled.
		Set this value to 0 (factory default) to disable periodic
		rekeying. The valid range is 1 to 4,294,967,295 seconds.
	WPA/WPA2 Re-auth	Allows you to set the WPA/WPA2 Re-authorization
	Interval	Interval in seconds. This only applies when WPA/WPA2
		Network Authentication is enabled.
		Set this value to 0 (factory default) to disable periodic
		rekeying. The valid range is 1 to 4,294,967,295 seconds.
84		4024320 Rev A