Cisco Systems DPC/EPC2325 DOCSIS important safety instructions Basic Settings, Advanced Settings

How Do I Configure My DOCSIS Residential Gateway?

Basic Settings

The following table provides a description of the pages available from within the Basic Settings section of the Setup page.

Field Name	Description
Password Settings	Use this link to set or modify your password settings
Set Time	Use this link to enable or disable time synchronization
	by Network Time protocol
Network Configuration	Use this link to enter or modify the basic settings for
	your network
LAN IP Address	Use this link to configure how Internet protocol (IP)
Management	addresses are assigned and managed in your network
Fixed CPE IP Assignment	Use this link to reserve IP addresses in the DHCP pool
	that will be used as static IP addresses in your local
	network.
Restart Modem	Use this link to restart your residential gateway
Save Configuration to	Use this link to save your cable modem RG
your PC	configuration to your local PC and to restore the RG
	configuration to your residential gateway, if necessary

Advanced Settings

The following table provides a description of the pages available from within the Advanced Settings section of the Setup page.

	Field Name	Description
	Options	Use this link to enable or disable advanced features
		on your network
	IP Address Filtering	Use this link to configure IP address filters. These
		filters prevent designated IP addresses from
		accessing the Internet
	MAC Address Filtering	Use this link to configure MAC address filters.
		These filters prevent designated MAC addresses
		from accessing the Internet
	Port Filtering	Use this link to configure transmission control
		protocol (TCP) and user datagram protocol (UDP)
		port filters. These filters prevent a range of
		TCP/UDP ports from accessing the Internet
	Port Forwarding	Use this link to configure port forwarding for local
		IP addresses. Port forwarding allows you to run a
		server on the local area network (LAN) by
		specifying the mapping of TCP/UDP ports to local
		PCs or to the IP address of other devices. This is a
		static setting that holds the ports open at all times
4024320 Rev A		27