Cisco Systems DPC/EPC2325 DOCSIS Setup Wireless Advanced Page Description

How Do I Configure My DOCSIS Residential Gateway?

Setup Wireless - Advanced Page Description

This section describes the section headings and fields descriptions of the Setup Wireless - Advanced page.

Note: If you make changes in the Setup Wireless - Advanced page, click Apply to apply and save your wireless advanced settings.

	Field Name	Description
	54g Network Mode	Allows you to optimize the performance of your
		wireless network using one of the following options:
		ƒ Max compatibility (factory default)
			Allows the access point to interoperate with both
			802.11b and 802.11g wireless client devices and
			minimizes interference with nearby 802.11b wireless
			networks.
		ƒ	54g Only
			The wireless access point will only accept 802.11g
			wireless clients.
		ƒ	54g LRS
			Allows clients that are not fully compatible with
			802.11g to operate with your wireless access point.
			Note: Switching to 54g-LRS mode can impact
			wireless performance. It is not recommended that
			you use this mode unless necessary for the
			compatibility described above.
		ƒ	Max Performance
			Maximum throughput. In this mode, the wireless
			access point accepts only 802.11g wireless clients.
			Setting the device in this mode may degrade the
			operation of near by 802.11b wireless networks.
	Basic Rate Set	Allows you to select the Basic Rate Set
	54g Protection	Allows you to prioritize 802.11g communication when
		there is a mix of 802.11b and 802.11g devices in the
		wireless network using one of the following options:
		ƒ	Auto (factory default)
			Maximize 802.11g performance in networks with a
			mix of 802.11b and 802.11g wireless client devices.
		ƒ	Off
			Maximum performance. Networks with
			802.11g-only wireless client devices.
	Xpress Technology	Allows you to enable or disable Xpress Technology
90				4024320 Rev A