Cisco Systems DPC/EPC2325 DOCSIS important safety instructions Field Name Description

How Do I Configure My DOCSIS Residential Gateway?

Field Name	Description
Remote Config	Checking this box enables Remote Configuration
Management	Management that allows the user or network operator to
	view and/or modify the gateway set-up parameters from
	a location on the WAN, as opposed to the LAN side of
	the gateway. Access to the set-up parameters is obtained
	by using the password to access the WebWizard.
	Enable this feature by checking the Remote Config
	Management box on the Setup Advanced Settings -
	Options page. To access your gateway from a remote
	location, you must also know the WAN IP address of the
	gateway. To find the WAN IP address, go to the Network
	Configuration page under Basic Settings. You will find
	the gateway's WAN IP address list on this page.
	Enter the WAN IP address of your gateway into the
	address field of any web browser using the following
	format: http://xxx.xxx.xxx.xxx:8080 where
	xxx.xxx.xxx.xxx represents the WAN IP address of your
	gateway.
	Be sure to follow the syntax exactly, and then click Go or
	press Enter. Your gateway webpages will appear on the
	remote computer. You will still need to enter your
	password to access the Setup pages of your gateway
	Note: If you choose to enable (check) this feature, be sure
	to set up a user password to prevent unauthorized access
	to your gateway settings.
Multicast Enable	Checking this box allows multicasts to pass from the
	WAN side through to the private network
UPnP Enable	Checking this box enables Universal Plug and Play
	features

46 4024320 Rev A