Additional information

12

Chapter 12:

Additional information

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized independent service company to carry out repair work.

Power

Symptom

Remedy

The power does not turn on.

• Make sure that the power cable is plugged in to an active power outlet.

 

• Try disconnecting from the power outlet, then plugging back in.

 

 

The receiver suddenly switches

• Check that there are no loose strands of speaker wire touching the rear panel or another set of wires. If

off or the Phase Control indicator

so, re-attach the speaker wires, making sure there are no stray strands.

blinks.

• The receiver may have a serious problem. Disconnect from the power and call a Pioneer authorized

 

independent service company.

 

 

During loud playback the power

• Turn down the volume.

suddenly switches off.

• Lower the 40 Hz and 125 Hz equalizer levels in the Manual MCACC setup on page 34.

 

• Try switching on the digital safety feature (put the receiver into standby, hold down the SYSTEM SETUP

 

button on the front panel and press STANDBY/ON to switch between SAFETY ON and SAFETY OFF. If

 

the power switches off even with SAFETY ON selected, turn down the volume.

 

 

The unit does not respond when

• Try switching the receiver off then back on again.

the buttons are pressed.

• Try disconnecting the power cable, then connect again.

 

 

AMP ERR blinks in the display,

• The receiver may have a serious problem. Do not try switching the receiver on. Contact a Pioneer

then the power automatically

authorized independent service company for help.

switches off. The MCACC blinks

 

and the power does not turn on.

 

OVERHEAT blinks in the display then the power automatically switches off.

Allow the unit to cool down in a well-ventilated place before switching back on. Check the safety precautions on pages 2–3 for information on improving heat dispersal.

No sound

Symptom

No sound is output when an input source is selected.

No sound output from the front speakers.

Remedy

Check the volume, mute setting (press MUTE) and speaker setting (press SPEAKERS).

Make sure the correct input source is selected.

Check that the MCACC setup microphone is disconnected.

Make sure the correct input signal is selected (press SIGNAL SELECT).

Check that the source component is connected properly (see Connecting your equipment on page 11).

Check that the speakers are connected properly (see Connecting the speakers on page 17).

No sound from the surround or center speakers.

Check that the Stereo listening mode isn’t selected; select one of the surround listening modes (see Listening in surround sound on page 26).

Check that the surround/center speakers are not set to NO (see Speaker Setting on page 37).

Check the channel level settings (see Channel Level on page 38).

Check the speaker connections (see Connecting the speakers on page 17).

57

En

Page 57
Image 57
Pioneer VSX-1016TXV-K operating instructions Additional information Chapter, Troubleshooting, Power, No sound

VSX-1016TXV-K specifications

The Pioneer VSX-1016TXV-K is a versatile and powerful A/V receiver that brings a wealth of features and technologies to enhance your home entertainment experience. Built with the audiophile in mind, it combines high-performance sound quality with modern connectivity and smart functionality.

One of the main features of the VSX-1016TXV-K is its robust amplification system, which delivers an impressive 7.1-channel surround sound experience. With a total output of 110 watts per channel, this receiver is capable of driving a variety of speakers, ensuring that every audio detail is crisp and immersive. This makes it an ideal choice for both movie watchers and music enthusiasts.

The receiver supports numerous audio formats, including Dolby TrueHD and DTS-HD Master Audio, providing lossless audio quality for high-definition content. This commitment to audio excellence is complemented by its use of advanced technologies such as the Pioneer MCACC (Multi-Channel Acoustic Calibration System), which automatically adjusts the receiver's settings based on the acoustics of your room, ensuring optimal sound performance.

In terms of connectivity, the VSX-1016TXV-K is equipped with multiple HDMI inputs, which support 1080p video pass-through and are compatible with the latest HDMI standards. This makes it easy to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, allowing seamless switching between sources. The unit also includes component and composite video inputs, as well as optical and coaxial digital audio inputs for greater flexibility.

Additionally, the receiver features an integrated AM/FM tuner, allowing listeners to enjoy their favorite radio stations. The user-friendly on-screen display and menu system enable easy navigation through different settings and offers access to a wide range of features, including preset equalizer settings and listening modes.

The VSX-1016TXV-K is designed with aesthetics in mind, featuring a sleek black finish that fits well in any home theater environment. Its robust build quality ensures durability while providing an attractive addition to your audio setup.

In conclusion, the Pioneer VSX-1016TXV-K A/V receiver stands out in the crowded market of home audio equipment with its exceptional sound performance, extensive connectivity options, and thoughtful user features. Whether you're hosting movie nights or enjoying your favorite music, this receiver delivers an impressive and engaging listening experience.