Controls and displays | 04 |
Display
| 1 |
| 2 |
| 3 |
| 4 | 5 | 6 | 7 | 8 | 9 |
SIGNAL | L | C | R | 2DIGITAL | DTS |
| VIDEO CONV. V.SB | MIDNIGHT | TUNED |
| ||
AUTO | SL | S | SR | WMA9 Pro 96/24 |
|
| DIALOGUE LOUDNESS STEREO |
| ||||
OVER | ATT | TONE | MONO | dB | ||||||||
|
| SBL | SB | SBR |
|
|
|
|
|
|
| |
DIGITAL |
|
|
|
|
|
|
|
| ||||
| LFE |
|
|
|
|
|
|
|
|
| ||
ANALOG |
|
|
|
|
|
|
|
|
| SR+ | ||
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| |
2PRO LOGIC Neo :6 |
|
|
|
|
|
|
|
| ||||
THX ADV.SURROUND |
|
|
|
|
|
|
|
|
| |||
STEREO | STANDARD |
|
|
|
|
|
|
|
|
| ||
SP | AB | SLEEP |
|
|
|
|
|
|
|
|
| |
10 | 11 | 12 | 13 |
|
|
|
| 14 |
|
| 15 | |
1 SIGNAL indicators
Light to indicate the currently selected input signal. AUTO lights when the receiver is set to select the input signal automatically (page 29).
2 Program format indicators
These change according to which channels are active in digital sources.
L – Left front channel
C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono)
SR – Right surround channel
SBL – Left surround back channel
SB – Surround back channel (mono)
SBR – Right surround back channel
LFE – Low frequency effects channel
3 Digital format indicators
9Master volume level
10Speaker indicators
Indicate the current speaker system, A and/or B (page 43).
11Listening mode indicators
THX – Lights when a Home THX mode is selected.
ADV. SURROUND – Lights when an Advanced Surround mode has been selected.
STEREO – Lights when stereo listening is switched on (see Listening in stereo on page 28).
STANDARD – Lights when a Standard Surround mode is switched on (see Listening in surround sound on page 26).
12SLEEP
Lights when the receiver is in sleep mode (page 50).
13 Matrix decoding format indicators
Light when a signal encoded in the corresponding format is detected.
4 OVER / ATT
OVER lights to indicate that the level of an analog source is too high. ATT lights when you use the attenuator (ANALOG ATT) to reduce it.
5 VIDEO CONV.
Lights when digital video conversion is enabled (page 48).
6 V.SB
Lights during Virtual surround back processing (page 29).
7 Sound processing indicators
Light according to the active sound processing feature.
8TUNER indicators
TUNED – Lights when a broadcast is being received. STEREO – Lights when a stereo FM broadcast is being received in auto stereo mode.
MONO – Lights when the mono mode is set using the MPX button.
2PRO LOGIC IIx – This lights to indicate 2Pro Logic II / 2Pro Logic IIx decoding (page 26).
Neo:6 – When one of the Neo:6 modes of the receiver is on, this lights to indicate Neo:6 processing (page 26).
14 Character display
Displays various system information.
15 SR+
Lights when the SR+ mode is switched on (page 45).
23
En
