Pioneer VSX-1016TXV-K operating instructions Direct function, Multi Operation and System Off

Controlling the rest of your system

3Press the button of the component for which you want to check the preset code, then press ENTER.

The brand name and preset code appears in the display for three seconds.

Direct function

• Default setting: ON

You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component. This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player.

11

Multi Operation and System Off

The Multi Operation feature allows you to program a series of up to 5 commands for the components in your system. For example, you could turn on your TV, turn on your DVD player and start playing the loaded DVD using only two buttons on the remote control.

Similar to multi operations, System Off allows you to use one button to stop and switch off a series of components

in your system at the same time.2

Programming a multi-operation or a shutdown sequence

		DVR 2	TOPMENU	MENU
DVD	TV	DVR1	TVCTRL	TUNE

When direct function is on, any component you select (using the input source buttons) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote control without

affecting the receiver.1

1While pressing the RECEIVER button, press SETUP. The remote LCD display shows SETUP.

		XM RADIO		DTVMENU ST		ST	T.EDIT
CD	CD-R	TUNER	RECEIVER		ENTER		RETURN
				SETUP
	SLEEP	SBch	ANALOG	GUIDE	CATEGORY TUNE	BAND
			ATT

TV CONTROL

1While pressing the RECEIVER button, press SETUP. The remote LCD display shows SETUP.

2 Use to select MULTI OP or SYS OFF from the menu and press ENTER.

2 Use to select DIRECT F then press ENTER.

The LCD on the remote prompts you for the button of the input source you want to control.

3Press the input source button for the component you want to control then press ENTER.

4 Use to switch direct function ON or OFF then press ENTER.

The LCD shows OK to confirm the setting.

If you selected Multi Operation (MULTI OP), the LCD on the remote prompts you for an input source button.

If you selected System Off (SYSOFF), go to step 4.

3Press the input source button for the component that will start the multi-operation then press ENTER. For example, if you want to start the sequence by switching on your DVD player, press DVD.

4 Use to select CODE EDT then press ENTER.

To erase any previously stored multi-operations (or shutdown sequences) select CODE ERS above.

5 Use	to select a command in the sequence then
press ENTER.

If this is the first command in the sequence, select 1ST CODE. Otherwise, simply choose the next command in the sequence. PRES KEY flashes after you press ENTER.

6If necessary, press the input source button for the component whose command you want to input.

This is only necessary if the command is for a new component (input source).

Note

1You can’t use direct function with the TV CTRL function.

2• Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see Setting the remote to control other components on page 51 for more on this).

•Some units may take some time to power up, in which case multiple operations may not be possible.

•Power on and off commands only work with components that have a standby mode.

53

En