Pioneer VSX-1016TXV-K Using the SR+ mode with a Pioneer plasma display, DVD player

Other connections

Important

•If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma display remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you switch the plasma display off.

•Before you can use the extra SR+ features, you need to make a few settings in the receiver. See The Input Assign menu on page 46 and SR+ Setup for Pioneer plasma displays on page 48 for detailed instructions.

•Use a 3-ringed miniplug SR+ cable to connect the CONTROL IN jack of this receiver with the CONTROL OUT jack of your plasma display.

VIDEO	Pioneer plasma	VIDEO
INPUT 1		INPUT 2
	display

DVD player		Satellite receiver, etc
DVD/LD		TV/SAT
AUDIO IN		AUDIO IN
		AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-1016TXV
STANDBY/ON
		DIGITAL PRECISION PROCESSING
MULTI JOG	ENTER	MASTER
		VOLUME

PHONES

To make the most of the SR+ features, you should connect your source components (DVD player, etc.) in a slightly different way to that described in this chapter. For each component, connect the video output directly to the plasma display, and just connect the audio (analog and/ or digital) to this receiver.

08

Using the SR+ mode with a Pioneer plasma display

When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer plasma display even easier. These features include:

•On-screen displays when making receiver settings, such as speaker setup, MCACC setup, and so on.

•On-screen volume display.

•On-screen display of listening mode.

•Automatic video input switching on the plasma display.

•Automatic volume muting on the plasma display.

See also SR+ Setup for Pioneer plasma displays on page 48 for more on setting up the receiver.

Important

•The additional SR+ features do not work when the XM Radio function is selected.

		DVR 2
DVD	TV	DVR1	TVCTRL
		XM RADIO
CD	CD-R	TUNER	RECEIVER
	SLEEP	SBch	ANALOG
			ATT
	SR+	DIMMER	MIDNIGHT/
			LOUDNESS
	DIALOG E	PHASE	S.RETRIEVER

1Make sure that the plasma display and this receiver are switched on and that they are connected with the SR+ cable.

See Using this receiver with a Pioneer plasma display above for more on connecting these components.

•Make sure you have also selected the display input to which you’ve connected the receiver in The Input Assign menu on page 46.

2To switch SR+ mode on/off, press RECEIVER, then the SR+ button.

The front panel display shows SR+ ON or SR+ OFF.

•The automatic volume muting feature is enabled separately; see SR+ Setup for Pioneer plasma displays on page 48.

45

En