Pioneer VSX-1016TXV-K operating instructions Manual speaker setup, Speaker Setting

The System Setup menu 07

1Select ‘EQ Data Check’ from the Manual MCACC setup menu.

3.Manual		MCACC			3g.EQ Data		Check
	a.Fine	Ch	Level
						ALL CH	ADJUST
	b.Fine SP		Distance			[ Left	]
	c.EQ	Auto	Setting			40Hz : + 1.0dB
	d.EQ	Data	Copy
	e.EQ	CUSTOM1		Adjust		125Hz :	0.0dB
	f .EQ	CUSTOM2		Adjust		250Hz :	0.0dB
	g.EQ	Data	Check			4kHz :	0.0dB
						13kHz :	0.0dB
						TRIM :	0.0dB
				:Return				:Return

2Select the setting you want to check.

•It is useful to do this while a source is playing so you can compare the different settings.

3Select the channels you want, pressing ENTER when you’re finished checking each one.

4When you're finished, press RETURN.

You return to the Manual MCACC setup menu.

•Speaker Distance – Specify the distance of your speakers from the listening position (page 39).

•THX Audio Setting – Specify the distance of your surround back speakers from each other (page 39).

•THX Speaker Setup – Specify whether or not you have a THX speaker system (page 39).

3Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

Speaker Setting

Use this setting to specify your speaker configuration (size, number of speakers). It is a good idea to make sure that the settings made in Automatically setting up for surround sound (MCACC) on page 8 are correct.

1Select ‘Speaker Setting’ from the Manual SP Setup menu.

Manual speaker setup

This receiver allows you to make detailed settings to optimize the surround sound performance. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers.).

These settings are designed to fine-tune your system, but if you’re satisfied with the settings made in Automatically setting up for surround sound (MCACC) on page 8, it isn’t necessary to make all of these settings.

Caution

• The test tones used in the System Setup are output at high volume.

1 Select ‘Manual SP Setup’ then press ENTER.

System Setup					4.Manual SP		Setup
	1.Surr	Back		System
						a.Speaker	Setting
	2.Auto	MCACC				b.Crossover Network
	3.Manual		MCACC			c.Channel	Level
	4.Manual		SP	Setup		d.Speaker	Distance

5.Input	Assign	e.THX Audio Setting
6.Other	Setup	f.THX Speaker Setup
	: Exit	:Return

2 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

•Speaker Setting – Specify the size and number of speakers you’ve connected (page 37).

•Crossover Network– Specify which frequencies will be sent to the subwoofer (page 38).

•Channel Level – Adjust the overall balance of your speaker system (page 38).

4.Manual SP		Setup	4a.Speaker Setting
			Front
	a.Speaker	Setting			SMALL
	b.Crossover Network		Center	[	SMALL	]
	c.Channel	Level	Surr	[ SMALL ]
	d.Speaker	Distance	SB	[ SMALL x2		]
	e.THX Audio Setting		SUB W.		YES
	f.THX Speaker Setup
		:Return	[ THX : ALL SMALL ]				:Finish

2Choose the set of speakers that you want to set then select a speaker size.

Use to select the size (and number) of each of the following speakers:

•Front – Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn’t connect a subwoofer. Select SMALL to send the bass frequencies to the subwoofer.1

•Center – Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO (the center channel is sent to the other speakers).

•Surr – Select LARGE if your surround speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect surround speakers choose NO (the sound of the surround channels is sent to the other speakers).

•SB – Select the number of surround back speakers you have (one, two or none). Select LARGE if your surround back speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect surround back speakers choose NO.2

Note

1If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES. Also, the center, surround, and surround back speakers can’t be set to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent to the subwoofer.

2• If the surround speakers are set to NO, the surround back speakers will automatically be set to NO.

•If you selected Second Zone or Front Bi-Amp(in Surround back speaker setting on page 33) you can’t adjust the surround back settings.

•If you select one surround back speaker only, make sure that speaker is hooked up to the left surround back terminal.

37

En