Pioneer VSX-1016TXV-K operating instructions Hdmi, XM radio messages

Additional information 12

HDMI

Symptom	Remedy
No picture or sound.	• If the problem still persists when connecting your HDMI component directly to your monitor, please
	consult the component or monitor manual or contact the manufacturer for support.
No picture.	• Depending in the output settings of the source component, it may be outputting a video format that can’t
	be displayed. Change the output settings of the source, or connect using the component, S-video or
	composite jacks.
OSD does not appear.	• The OSD will not appear if you have connected using the HDMI output to your TV. Use component, S-
	video, or composite connections when setting up the system.
No sound, or sound suddenly	• Since the HDMI audio signal is sent through this receiver to your TV, you need to make separate
ceases.	connections for audio if you want to hear your HDMI component through this system. See Connecting using
	HDMI on page 41 for more on this.
	• If you’ve made separate connections for audio, make sure you have assigned the analog/digital jack(s) to
	the corresponding HDMI input for the component. See Assigning the HDMI inputs on page 47 to do this.
	• Check the audio output settings of the source component.

XM radio messages

Symptom	Cause	Action
Check Antenna	The XM antenna is not connected.	Check that the XM antenna cable is attached securely.
XM ANT ERR	A short-circuit occurring in the antenna or	Make sure that there is nothing unusual with the antenna or
	surrounding antenna cable.	antenna cable. Switch the power off then back on again.
Updating	The radio is being updated with the latest	Wait until the encryption code has been updated. Channels
	encryption code.	00 and 01 should function normally.
No Signal	The XM signal is too weak at the current location.	n/a
Loading	The receiver is acquiring audio or program	Wait until the information has been received.
	information.
Off Air	The channel currently selected has stopped	Select another channel.
	broadcasting.
CH– – –	You have selected a channel that does not exist,	The receiver will automatically switch to channel 001 (or the
	or that you have not subscribed to.	last selected channel).
– – – – – – – –	There is no artist name/feature, song/program	No action needed.
	title, or channel category associated with the
	channel at this time.

Note

•If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.

61

En