How Do I Configure My DOCSIS Residential Gateway?
Setup Advanced Settings - Port Triggers Page Description
Use this link to enter and enable the port forwarding trigger and target range start and end ports along with protocol information in the appropriate fields. The following example illustrates how to use the port triggering feature to configure the Microsoft
Note: For most widely used applications (including Microsoft
1In the first row, enter 88 in both Start Port and End Port fields.
2In the same row, select UDP from the
3In the second row, enter 3074 in both Start Port and End Port fields.
4In the same row as the second entry, select Both, and then select the box in the Enable field.
5Click Apply to apply and save your new port forwarding settings.
54 | 4024320 Rev A |