How Do I Configure My DOCSIS Residential Gateway?

Configuring Remote Bridges

Use the Setup Wireless - Bridging page to configure your configure remote bridges.

Note: If you are not familiar with the advanced settings detailed in this section, contact your service provider before you attempt to change any of the wireless home gateway default wireless advanced settings.

Click Bridging in the Wireless section of the Setup page to access the Setup Wireless - Bridging page.

Setup Wireless Access Control Page Example

The following illustration is an example of the Setup Wireless - Bridging page.

Setup Wireless - Bridging Page Description

The Setup Wireless - Bridging page allows you to Enable or Disable wireless bridging and to add remote bridges. Click Apply to apply and save your new settings.

4024320 Rev A

95

Page 95
Image 95
Cisco Systems DPC/EPC2325 DOCSIS Configuring Remote Bridges, Setup Wireless Access Control Page Example