Cisco Systems DPC/EPC2325 DOCSIS important safety instructions Function Keys, Key Description

How Do I Configure My DOCSIS Residential Gateway?

Setup Basic Settings - Enable/Disable Time Synchronization by Network Time Protocol Page Description

The following table provides a description of the fields within the Basic Settings Enable/Disable time synchronization by Network Time protocol page.

Field Name	Description
Current System Time	Displays the current system time and date
Network Time Protocol	Allows you to enable or disable network time
	protocol
	Note: The residential gateway will automatically
	use the time server in your broadband network.
	Should there be no current time displayed or if the
	network time is incorrect, enable Network Time
	Protocol to use a public Internet time server to set
	the clock in the gateway.
Latest Update Success	Displays the time and date of the last successful
	time update
Time Zone	Displays the current time zone. The drop-down list
	allows you to select your local time zone.
Daylight Saving Time	Allows you to adjust the time during periods when
	Daylight Saving Time is in effect. Check the Enable
	box to enable or disable this setting.
	Note: If the offset for Daylight Savings Time is
	other than 60 minutes, enter the offset in the
	minutes field.
Time Server	Add and delete time server URLs or IP addresses to
	and from the list, as required. When using Network
	Time Protocol, multiple time servers can be
	specified for the gateway to query for time of day.
	The gateway will sequentially step through the
	listed time servers until it acquires the current time.
	There are three well known public time servers
	entered as default servers.

Function Keys

Key	Description
Apply	Saves all additions, edits, and changes
Add Server	Allows you to add a network time server
Remove Server	Allows you to remove a network time server

4024320 Rev A 33