Chapter 5 | Advanced Configuration |
Administration > Configuration Management
On this screen you can save a configuration file of the Access Point’s current settings or restore a configuration file of previously saved settings.
Administration > Configuration Management
Save Configuration To save a backup configuration file, click the Save Configuration button and save the file to the desired location.
Restore Configuration To upload a configuration file to the Access Point, follow the steps below:
1.Type the filename and path of the configuration file in the field provided or click the Browse button to locate the file.
2.Click the Apply button.
Help information is available on the right side of the screen.
Status > Local Network
The Local Network screen displays the Access Point’s current status information for the local network.
Status > Local Network
HardwareVersion This is the version of the Access Point’s current hardware.
Software Version This is the version of the Access Point’s current software.
Local MAC Address The MAC address of the Access Point’s Local Area Network (LAN) interface is displayed here.
System Up Time This is the length of time the Access Point has been running.
IP Address This shows the Access Point’s IP Address, as it appears on your local network.
Subnet Mask This shows the Access Point’s Subnet Mask.
Default Gateway This displays the Access Point’s default gateway information.
Primary DNS This displays the Access Point’s primary DNS information.
Secondary DNS This displays the Access | Point’s |
secondary DNS information. |
|
Help information is available on the right side of the screen.
17 |
