Linksys WAP2000 manual Appendix D Specifications

Appendix D

Appendix D:

Specifications

Specifications

Model	WAP2000
Standards	IEEE802.11g, IEEE802.11b,
	IEEE802.3, IEEE802.3u,
	IEEE802.3af (Power over
	Ethernet), 802.1p
	(QoS priority), 802.1Q (VLAN),
	802.1X
	(Security Authentication),
	802.11i - Ready
	(Security WPA2), 802.11e
	- Ready (Wireless QoS),
	802.11F (Wireless Roaming)
Ports	10BASE-T/100 BASE-TX
	Ethernet, 12 VDC Power
Buttons	Reset
Cabling Type	UTP CAT 5
LEDs	Power, PoE, Wireless, Ethernet
Operating System	Linux

Setup/Config

WebUI	Built in Web UI for Easy
	browser-based configuration
	(HTTP/HTTPS)

Management

SNMP Version	SNMP Version 1, 2c, 3
Event Logging	E-mail Notification
	Remote Syslog
Web F/W Upgrade	Firmware Upgradable
	Through Web-Browser
Diags: Flash, etc.	Flash, RAM, LAN, WLAN
DHCP	DHCP Client

Operating Modes

Access Point	Access Point Mode,
	point-to-point Bridge Mode,
	point-to-multipoint Bridge
	Mode, Repeater Mode

Wireless

Spec/Modulation	Radio and Modulation Type:
	802.11b/DSSS, 11g/OFDM
Channels	Operating Channels:
	11 North America,
	13 Most of Europe
	(ETSI and Japan)

Specifications

# of Internal Ant.	None
# of External Ant.	2 (Omnidirectional) 3 dBi SMA
	detachable
Transmit Power	Transmit Power (Adjustable) @
	Normal Temp Range:
	11b - 18 dBm; 11g - 16 dBm
Antenna Gain	3 dBi
Receiver Sensitivity	11.g: 54Mbps@ -72dBm,
	11.b: 11Mbps@ -85dBM

Security

WEP/WPA/WPA2	WEP 64bit/128 bit, WPA-PSK,
	WPA2-PSK, WPA-ENT,
	WPA2-ENT
Access Control	Wireless Connection Control:
	MAC-Based
SSID Broadcast	SSID Broadcast Enable/Disable
802.1X	IEEE 802.1X support
Wireless Client Isolation	Wireless Client devices can
	be isolated from each other
	either within an SSID or
	between two SSIDs

Quality of Service

QoS	4 Queues
	WMM Wireless priority
General
	Wireless roaming based on
	IAPP
	Load Balancing
	Auto-channel selection

Environmental

Dimensions	8.66" x 6.69" x 1.50"
	(220 x 170 x 38 mm)
Weight	1.69 lb (0.765 kg)
Power	12V 1A DC input
	and IEEE802.3af Compliant PoE
	Max Power Draw: 3.48W
Certification	FCC, ICES-003, CE
Operating Temp.	14 to 131ºF (-10 to 55ºC)
Storage Temp.	-22 to 158ºF (-30 to 70ºC)
Operating Humidity	10 to 90%, Noncondensing
Storage Humidity	5 to 95%, Noncondensing

Wireless-G Access Point with Power Over Ethernet 28