Wireless-G Access Point with Power Over Ethernet

The Wireless - Basic Wireless Settings Tab

Change the wireless network settings on this screen. The Access Point can connect to up to eight wireless networks at the same time.

Wireless Network

Configure the Access Point using the available settings. You can enter and save more than one configuration for the Access Point because the Access Point can work with a primary wireless network and up to seven Virtual Local Area Networks (VLANs). The Access Point can support a maximum of 32 wireless client devices.

NOTE: To use the Access Point’s VLAN features, you must have a managed switch.

Wireless Network Mode. Select Mixed and both Wireless-G and Wireless-B computers will be allowed on the network, but the speed will be reduced. Select G-Only for maximum speed with Wireless-G products only. The final selection, B-Only, allows only Wireless-B products on the network. You can also disable wireless performance if you select Disabled.

VLAN Trunk. Select Enabled if you want to use the Access Point’s VLAN features.

Priority. Select Enabled if you want to use the Access Point’s capability to assign VLAN priorities. Select Disabled if you want to disable the Access Point’s capability to assign VLAN priorities.

Main SSID. Enter settings for the Access Point’s primary wireless network.

Virtual SSID1-7. You can enter settings for up to seven virtual wireless networks.

SSID Name. The SSID is the unique name shared among all devices in a wireless network. It is case-sensitive and must not exceed 32 alphanumeric characters, which may be any keyboard character. Make sure this setting is the same for all devices in each wireless network.

VLAN ID. Enter the ID number you want to assign to this VLAN. Make sure at least one of these matches the Access Point VLAN ID entered on this screen.

Priority. You can assign VLAN priority to each wireless network, Low, Medium, or High.

TX Rate Limitation. The default setting is 54 Mbps. The range is from 1 to 54Mbps. The rate of data transmission should be set depending on the speed of your wireless network. You can select from a range of transmission speeds, or you can keep the default setting, 54 Mbps, to have the Access Point enable the Auto-

Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet

Figure 5-4: Wireless - Basic Wireless Settings Screen

14

The Wireless - Basic Wireless Settings Tab

Page 19 Page 21
Page 20
Image 20
Linksys WAP54GP manual Wireless Basic Wireless Settings Tab, Wireless Network
Page 19 Page 21

WAP54GP specifications

The Linksys WAP54GP is a wireless access point designed for business and enterprise environments, providing reliable network connectivity while accommodating various networking standards. It is particularly appreciated for its ability to deliver Power over Ethernet (PoE), which simplifies installation by allowing power and data to be transmitted over a single Ethernet cable.

One of the standout features of the WAP54GP is its adherence to the IEEE 802.11g/b standards, offering wireless data transfer rates of up to 54 Mbps and backward compatibility with older 802.11b devices. This makes it an ideal choice for upgrading legacy networks while still supporting newer devices, ensuring seamless connectivity across different generations of wireless technology.

The WAP54GP boasts a robust range of security features, including WPA (Wi-Fi Protected Access) and WPA2 encryption methods. These protocols protect sensitive data transmitted over the network, clearly addressing common security concerns associated with wireless networks. Additionally, the device supports MAC address filtering and has a built-in firewall to further enhance network security.

With its ability to function in various modes, including access point, bridge, and repeater modes, the WAP54GP provides flexibility for different networking needs. This versatility allows organizations to adapt their network setups according to specific requirements, such as expanding coverage or extending enterprise networks to meet growing demands.

The access point is equipped with multiple 10/100 Ethernet ports, providing wired connections for devices that require stable links, such as printers or desktops. Furthermore, its user-friendly web-based setup wizard allows for straightforward configuration and management, even for users with limited technical expertise.

Another significant characteristic of the Linksys WAP54GP is its compact, durable design, intended for easy deployment in various environments. It can be mounted on walls or ceilings, making it suitable for different office layouts without compromising performance.

In summary, the Linksys WAP54GP is an efficient and versatile wireless access point that combines essential features for security, flexibility, and ease of use. Its compatibility with a range of devices, ability to deliver power over Ethernet, and solid wireless performance make it a valuable asset for any organization looking to enhance its network capabilities.
Top Page Image Contents