Linksys WAP54GP manual AP Mode, Administration, Status

Models: WAP54GP

1 67
Download 67 pages 55.66 Kb
Page 17
Image 17

Wireless-G Access Point with Power Over Ethernet

Advanced Wireless Settings. Use this screen to configure the Access Point’s more advanced wireless settings.

AP Mode

Use this screen to configure how the Access Point will work with other access points in your network.

Administration

You will use the Administration tabs to manage the Access Point.

Management. This screen allows you to customize the password and Simple Network Management Protocol (SNMP) settings.

Log. Configure the Log settings for the Access Point on this screen.

Factory Default. Use this screen to reset the Access Point to its factory default settings.

Firmware Upgrade. Upgrade the Access Point’s firmware on this screen.

Language Upgrade. On this screen, change the language of the Access Point’s Web-based Utility.

Reboot. Use this screen to reboot the Access Point.

Config Management. You can back up the configuration file for the Access Point, as well as save the backup configuration file to the Access Point.

Status

You will be able to view status information for your local network, wireless networks, and network performance.

Local Network. This screen will display current information on the Access Point and its local network.

Wireless. This screen will display current information on the Access Point and its wireless networks.

System Performance. This screen will display current information on the Access Point and its data transmissions.

Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet

snmp: the standard e-mail protocol on the Internet.

firmware: the programming code that runs a networking device.

11

Navigating the Utility

Page 17
Image 17
Linksys WAP54GP manual AP Mode, Administration, Status