Wireless-G Access Point with Power Over Ethernet

Italy

This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless operating within the boundaries of the owner’s property, the use of this 2.4 GHz Wireless LAN product requires a ‘general authorization’. Please check with http://www.comunicazioni.it/it/ for more details.

Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all’interno del proprio fondo, l’utilizzo di prodotti Wireless LAN a 2.4 GHz richiede una “Autorizzazione Generale”. Consultare http://www.comunicazioni.it/it/ per maggiori dettagli.

Product Usage Restrictions

This product is designed for indoor usage only. Outdoor usage is not recommended.

This product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together with the equipment. However, some applications may require the antenna(s) to be separated from the product and installed remotely from the device by using extension cables. For these applications, Linksys offers an R-SMA extension cable (AC9SMA) and an R-TNC extension cable (AC9TNC). Both of these cables are 9 meters long and have a cable loss (attenuation) of 5 dB. To compensate for the attenuation, Linksys also offers higher gain antennas, the HGA7S (with R-SMA connector) and HGA7T (with R-TNC connector). These antennas have a gain of 7 dBi and may only be used with either the R-SMA or R-TNC extension cable.

Combinations of extension cables and antennas resulting in a radiated power level exceeding 100 mW EIRP are illegal.

Power Output of Your Device

To comply with your country’s regulations, you may have to change the power output of your wireless device. Proceed to the appropriate section for your device.

Note: The power output setting may not be available on all wireless products. For more information, refer to the documentation on your product’s CD or http://www.linksys.com/international.

Wireless Adapters

Wireless adapters have the power output set to 100% by default. Maximum power output on each adapter does not exceed 20 dBm (100 mW); it is generally 18 dBm (64 mW) or below. If you need to alter your wireless adapter’s power output, follow the appropriate instructions for your computer’s Windows operating system:

59

Appendix H: Regulatory Information

Page 65
Image 65
Linksys WAP54GP manual Wireless-G Access Point with Power Over Ethernet

WAP54GP specifications

The Linksys WAP54GP is a wireless access point designed for business and enterprise environments, providing reliable network connectivity while accommodating various networking standards. It is particularly appreciated for its ability to deliver Power over Ethernet (PoE), which simplifies installation by allowing power and data to be transmitted over a single Ethernet cable.

One of the standout features of the WAP54GP is its adherence to the IEEE 802.11g/b standards, offering wireless data transfer rates of up to 54 Mbps and backward compatibility with older 802.11b devices. This makes it an ideal choice for upgrading legacy networks while still supporting newer devices, ensuring seamless connectivity across different generations of wireless technology.

The WAP54GP boasts a robust range of security features, including WPA (Wi-Fi Protected Access) and WPA2 encryption methods. These protocols protect sensitive data transmitted over the network, clearly addressing common security concerns associated with wireless networks. Additionally, the device supports MAC address filtering and has a built-in firewall to further enhance network security.

With its ability to function in various modes, including access point, bridge, and repeater modes, the WAP54GP provides flexibility for different networking needs. This versatility allows organizations to adapt their network setups according to specific requirements, such as expanding coverage or extending enterprise networks to meet growing demands.

The access point is equipped with multiple 10/100 Ethernet ports, providing wired connections for devices that require stable links, such as printers or desktops. Furthermore, its user-friendly web-based setup wizard allows for straightforward configuration and management, even for users with limited technical expertise.

Another significant characteristic of the Linksys WAP54GP is its compact, durable design, intended for easy deployment in various environments. It can be mounted on walls or ceilings, making it suitable for different office layouts without compromising performance.

In summary, the Linksys WAP54GP is an efficient and versatile wireless access point that combines essential features for security, flexibility, and ease of use. Its compatibility with a range of devices, ability to deliver power over Ethernet, and solid wireless performance make it a valuable asset for any organization looking to enhance its network capabilities.