Wireless-G Access Point with Power Over Ethernet

Placement Options

There are three ways to place the Access Point. The first way is to place it horizontally on a surface, so it sits on its four rubber feet. The second way is to stand the Access Point vertically on a surface. The third way is to mount it on a wall. The stand and wall-mount options are explained in further detail below.

Stand Option

1.Near the Access Point’s bottom panel are two rubber feet and two rubber inserts. Remove them to expose the stand slots you want to use.

2.The Access Point includes four triangular stands. With its rubber pad facing the bottom, insert a stand into a slot, and push the stand upward until the stand snaps into place.

Repeat this step with the other stands.

Now that the hardware installation is complete, proceed to “Chapter 5: Configuring the Wireless-G

Access Point with Power Over Ethernet,” for directions on how to configure the Access Point.

Wall-Mount Option

1.On one of the Access Point’s side panels are four rubber feet. Remove four adjacent feet to expose the wall- mount slots you want to use. The distance between two adjacent slots is 145 mm (5.7 inches).

2.Determine where you want to mount the Access Point.

3.Drill four holes into the wall. Make sure adjacent holes are 145 mm (5.7 inches) apart.

4.Insert a screw into each hole, and leave 5 mm (0.2 inches) of its head exposed.

5.Maneuver the Router so the wall-mount slots line up with the four screws.

6.Place the wall-mount slots over the screws and slide the Access Point down until the screws fit snugly into the wall-mount slots.

Now that the hardware installation is complete, proceed to “Chapter 5: Configuring the Wireless-G

Access Point with Power Over Ethernet,” for directions on how to configure the Access Point.

Chapter 4: Connecting the Wireless-G Access Point with Power Over Ethernet

Figure 4-3: The Access Point’s Stand Slots

145mm

(5.7 inches)

Figure 4-4: The Access Point’s Wall-Mount Slots

9

 

Placement Options

Page 14 Page 16
Page 15
Image 15
Linksys WAP54GP manual Placement Options, Stand Option, Wall-Mount Option
Page 14 Page 16

WAP54GP specifications

The Linksys WAP54GP is a wireless access point designed for business and enterprise environments, providing reliable network connectivity while accommodating various networking standards. It is particularly appreciated for its ability to deliver Power over Ethernet (PoE), which simplifies installation by allowing power and data to be transmitted over a single Ethernet cable.

One of the standout features of the WAP54GP is its adherence to the IEEE 802.11g/b standards, offering wireless data transfer rates of up to 54 Mbps and backward compatibility with older 802.11b devices. This makes it an ideal choice for upgrading legacy networks while still supporting newer devices, ensuring seamless connectivity across different generations of wireless technology.

The WAP54GP boasts a robust range of security features, including WPA (Wi-Fi Protected Access) and WPA2 encryption methods. These protocols protect sensitive data transmitted over the network, clearly addressing common security concerns associated with wireless networks. Additionally, the device supports MAC address filtering and has a built-in firewall to further enhance network security.

With its ability to function in various modes, including access point, bridge, and repeater modes, the WAP54GP provides flexibility for different networking needs. This versatility allows organizations to adapt their network setups according to specific requirements, such as expanding coverage or extending enterprise networks to meet growing demands.

The access point is equipped with multiple 10/100 Ethernet ports, providing wired connections for devices that require stable links, such as printers or desktops. Furthermore, its user-friendly web-based setup wizard allows for straightforward configuration and management, even for users with limited technical expertise.

Another significant characteristic of the Linksys WAP54GP is its compact, durable design, intended for easy deployment in various environments. It can be mounted on walls or ceilings, making it suitable for different office layouts without compromising performance.

In summary, the Linksys WAP54GP is an efficient and versatile wireless access point that combines essential features for security, flexibility, and ease of use. Its compatibility with a range of devices, ability to deliver power over Ethernet, and solid wireless performance make it a valuable asset for any organization looking to enhance its network capabilities.
Top Page Image Contents