Linksys WAPPOE manual Splitter’s First Side Panel, Splitter’s Second Side Panel

Product Overview

Chapter 1

Splitter’s First Side Panel

The Power & Data IN port is located on the Injector’s first side panel.

Power & Data IN  This port allows you to connect the Splitter to the Injector. (You will use the included Ethernet network cable to make this connection.)

Splitter’s Second Side Panel

The built-in Ethernet network and Power cables are located on the Splitter’s second side panel.

Ethernet OUT  The Splitter has a built-in Ethernet network cable. You will connect this cable to the Ethernet network port of your remotely located access point or other network device.

Power  The Splitter has a built-in power cord. You will connect this cord to the Power port of your remotely located access point or other network device.

Power Over Ethernet Adapter Kit