Linksys WPS11 manual Installation is now complete, Changing the IPP Port Settings

Instant Wireless™ Series

IPP Client Configuration for Windows 95/98/Millennium/NT 4.0/2000/XP

1.Run the Add IPP Port program entry created by the installation. A screen like the one shown in Figure 8-1 will be displayed. If you do not see the Add IPP Port program entry, then click Start. Select Programs and then IPP Port Monitor. Click Add IPP Port.

Figure 8-1

1.If Internet access from your location is via a Proxy Server, check Access IPP Server via Proxy Server, and enter details of your Proxy Server. (This will be the same as your Browser configuration.)

2.Enter the IP Address or URL of the IPP Server.

3.Click Select Device Port to view the available ports on the IPP Server and select the appropriate port. A connection to the IPP Server will be estab- lished at this time.

Wireless PrintServer

4.Click Save to create the IPP port on your system. You will see a message confirming that the port has been created, then Figure 8-2:

Figure 8-2

5.Either select an existing printer to use the new port, and click OK.

OR

Click the Add New Printer button to create a new printer to use the IPP port. This will start the Add Printer wizard. Follow the prompts to complete the process. Ensure that the new printer uses the IPP port.

Installation is now complete.

·To create additional IPP Ports, repeat the entire procedure.

·The Proxy Server and other options are set individually for each IPP Port.

Changing the IPP Port Settings

After the IPP port is created, you can reach the Configure IPP Port screen by:

1.Open the Printers folder (Start - Settings - Printers).

2.Right-click the IPP Printer and select Properties.

35 36