5
Standard Installation
Note:
1. Test to make sure that the entire installation works properly before pulling cables through
ceilings/walls.
2. 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, is required to achieve
maximum distance and resolution.
3. The diagram below shows a B126-2X2 installation, but installation will be the same for the
B126-4X4, except for the number of ports.
4. The back panel of the B126-4X4 contains an IR port which has been capped off. This port is
intended for future use, and does not currently function.
B126-2x2
Computer
Blu-Ray™
Cable Box
or DVR
B126-1P0
B126-1A0
Up to 125 ft. at 1080p @ 60Hz
Up to 175 ft. at 1080i @ 60Hz
Up to 50 ft. at 1080p @ 60Hz
Up to 75 ft. at 1080i @ 60Hz
1Makesurealldevicesbeingconnectedareturnedoff.
2 Optional:Connectthe3.5mmtoDB9adaptertotheRS232serial
portontheswitch,andthentotheDB9serialportonthecomputer
youwillbeusingtocontrolitwith.
3 ConnecttherstHDMIsourcetotheportontheswitchmarkedSource A.
4 Repeatstep3toconnectadditionalHDMIsourcestotheremainingports.
5Connecttheexternalpowersupplytotheswitchandplugitintoa
TrippLiteSurgeSuppressor,PowerDistributionUnit(PDU),or
UninterruptiblePowerSupply(UPS).Whenreceivingpower,thefollowing
LEDswillilluminate:TheGreenPowerLED,TheOrangeSourceLEDs
(for the Sourceportsthathavedevicesconnectedtothem),andthe
GreenRJ45Output LEDs.AGreenLEDwillalsoilluminatetoindicate
thesourcethatisbeingtransmittedtoeachOutput port.
6UsingCat5e/6cable,connecttheRJ45portmarkedOutput 1 to a
B126-Seriesremotereceiverunit.
13-11-140 93-32BB.indd 5 11/19/2013 4:57:40 PM