Linksys WRT310N manual Internet Access Policy, Summary, Advanced Configuration, Chapter

Chapter 3

Advanced Configuration

Access Restrictions > Internet Access

Internet Access Policy

Access Policy  Access can be managed by a policy. Use the settings on this screen to establish an access policy (after Save Settings is clicked). Selecting a policy from the drop- down menu will display that policy’s settings. To delete a policy, select that policy’s number and click Delete This Policy. To view all the policies, click Summary.

Summary

The policies are listed with the following information: No., Policy Name, Access, Days, Time, and status (Enabled). To enable a policy, select Enabled. To delete a policy, click Delete. Click Save Settings to save your changes, or click Cancel Changes to cancel your changes. To return to the Internet Access Policy screen, click Close.

Summary

Wireless-N Gigabit Router

Status  Policies are disabled by default. To enable a policy, select the policy number from the drop-down menu, and select Enabled.

To create a policy, follow steps 1-11. Repeat these steps to create additional policies, one at a time.

1.Select a number from the Access Policy drop-down menu.

2.Enter a Policy Name in the field provided.

3.To enable this policy, select Enabled.

4.Click Edit List to select which PCs will be affected by the policy. The List of PCs screen appears. You can select a PC by MAC address or IP address. You can also enter a range of IP addresses if you want this policy to affect a group of PCs. After making your changes, click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Then click Close.

List of PCs

5.Select the appropriate option, Deny or Allow, depending on whether you want to block or allow Internet access for the PCs you listed on the List of PCs screen.

6.Decide which days and what times you want this policy to be enforced. Select the individual days during which the policy will be in effect, or select Everyday. Then enter a range of hours and minutes during which the policy will be in effect, or select 24 Hours.

7.You can block websites with specific URL addresses. Enter each URL in a separate URL field.

8.You can also block websites using specific keywords. Enter each keyword in a separate Keyword field.

20