Wireless-G Broadband Router with SpeedBooster

12.To start over, I need to set the Router to factory default.

Hold the Reset button for 10 seconds and then release it. This will return the password, forwarding, and other settings on the Router to the factory default settings. In other words, the Router will revert to its original factory configuration.

13.My power LED will not stop flashing.

Press and hold the reset button for five seconds. If this does not work, your firmware may be corrupted. To upgrade the firmware, follow the steps in “Appendix C: Upgrading Firmware.”

14.I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys website and download the latest firmware at www.linksys.com.

Follow these steps:

1.Go to the Linksys website at http://www.linksys.com and download the latest firmware.

2.To upgrade the firmware, follow the steps in “Appendix C: Upgrading Firmware.”

15.The firmware upgrade failed, and/or the Power LED is flashing.

The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or make the Power LED stop flashing:

If the firmware upgrade failed, use the TFTP program (it was downloaded along with the firmware). Open the pdf that was downloaded along with the firmware and TFTP program, and follow the pdf’s instructions.

Set a static IP address on the PC; refer to “Problem #1, I need to set a static IP address.” Use the following IP address settings for the computer you are using:

IP Address: 192.168.1.50

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

Perform the upgrade using the TFTP program or the Administration tab of the Router’s web-based utility.

16.My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial-up connection to the Internet.

There is a setup option to “keep alive” the connection. This may not always work, so you may need to re- establish connection periodically.

1.To connect to the Router, go to the web browser, and enter http://192.168.1.1 or the IP address of the Router.

2.Enter the password, if asked. (The default password is admin.)

3.On the Setup screen, select the option Keep Alive, and set the Redial Period option at 20 (seconds).

4.Click the Save Settings button.

5.Click the Status tab, and click the Connect button.

Appendix A: Troubleshooting

68

Common Problems and Solutions

Page 76
Image 76
Linksys WRT54GS manual To start over, I need to set the Router to factory default, My power LED will not stop flashing

WRT54GS specifications

The Linksys WRT54GS is a well-regarded wireless router that has earned its place in the annals of networking history due to its robust features and stellar performance. Initially released in the early 2000s, this model has become a favorite among both home and small business users, thanks to its reliability and ease of use.

One of the standout features of the WRT54GS is its support for the 802.11g wireless standard, which allows for data transfer rates up to 54 Mbps. This speed is sufficient for most everyday tasks such as browsing the web, streaming music, and even watching videos, making it a versatile choice for households with multiple devices. The router also includes backward compatibility with the older 802.11b standard, ensuring that users with older devices can still connect without issue.

The WRT54GS is equipped with a 4-port Ethernet switch, allowing for wired connections to additional devices. This is particularly advantageous for users who require stable, high-speed connections for gaming consoles or desktop computers. The Ethernet ports operate at speeds of up to 100 Mbps, further enhancing the overall network performance.

Security is a critical aspect of any networking device, and the WRT54GS does not disappoint. It supports various encryption protocols, including WEP, WPA, and WPA2, offering multiple layers of security to protect user data. The router also features a built-in firewall, which adds an additional layer of defense against external threats.

Another key characteristic of the WRT54GS is its user-friendly web-based interface, which simplifies the process of setting up and managing the network. Users can easily configure settings, set up parental controls, and manage connected devices without requiring advanced technical skills.

Additionally, the WRT54GS is renowned for its open-source firmware compatibility, enabling tech-savvy users to enhance its functionality with custom firmware options like DD-WRT or Tomato. These alternatives can unlock additional features such as improved bandwidth management, advanced VPN support, and enhanced wireless performance.

In summary, the Linksys WRT54GS is a reliable and versatile router with features that cater to a wide range of users. Its combination of robust wireless performance, extensive security options, and user-friendly configuration makes it an ideal choice for many. While more advanced options are available today, the WRT54GS remains a classic model that paved the way for future networking devices.