Manuals / Linksys / Computer Equipment / Network Router

Linksys WRTSL54GS manual To start over, I need to set the Router to factory default

Models: WRTSL54GS

1 95
Download 95 pages 26.18 Kb
Page 64
Image 64

Wireless-G Media Storage Link Router with SpeedBooster

11.To start over, I need to set the Router to factory default.

Hold the Reset button for 10 seconds and then release it. This will return the password, forwarding, and other settings on the Router to the factory default settings. In other words, the Router will revert to its original factory configuration.

12.I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys website and download the latest firmware at www.linksys.com.

Follow these steps:

1.Go to the Linksys website at http://www.linksys.com and download the latest firmware.

2.To upgrade the firmware, follow the steps in “Appendix C: Upgrading Firmware.”

13.The firmware upgrade failed, and/or the Power LED is flashing.

The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or make the Power LED stop flashing:

•If the firmware upgrade failed, use the TFTP program (it was downloaded along with the firmware). Open the pdf that was downloaded along with the firmware and TFTP program, and follow the pdf’s instructions.

•Set a static IP address on the PC; refer to “Problem #2, I need to set a static IP address.” Use the following IP address settings for the computer you are using:

IP Address: 192.168.1.50

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

•Perform the upgrade using the TFTP program or the Administration tab of the Router’s web-based utility.

14.My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial-up connection to the Internet.

•There is a setup option to “keep alive” the connection. This may not always work, so you may need to re- establish connection periodically.

1.To connect to the Router, go to the web browser, and enter http://192.168.1.1 or the IP address of the Router.

2.Enter the password, if asked. (The default password is admin.)

3.On the Setup screen, select the option Keep Alive, and set the Redial Period option at 20 (seconds).

4.Click the Save Settings button.

5.Click the Status tab, and click the Connect button.

6.You may see the login status display as Connecting. Press the F5 key to refresh the screen, until you see the login status display as Connected.

•Click the Save Settings button to continue.

•If the connection is lost again, follow steps 1- 6 to re-establish connection.

Appendix A: Troubleshooting

57

Common Problems and Solutions

Page 63 Page 65
Page 64
Image 64
Linksys WRTSL54GS manual To start over, I need to set the Router to factory default, Need to upgrade the firmware
Page 63 Page 65

WRTSL54GS specifications

The Linksys WRTSL54GS is a versatile wireless router that has earned a reputation for its robust performance and user-friendly features. A member of the renowned WRT family, it combines a powerful 802.11g wireless capability with a wired Ethernet connection, making it ideal for home and small office environments.

One of the primary features of the WRTSL54GS is its ability to serve as a wireless access point and a router simultaneously. It supports a maximum data transfer rate of up to 54 Mbps, allowing users to enjoy fast internet connectivity. The router operates on the 2.4GHz frequency band, which is suited for routine web browsing, streaming, and online gaming.

The WRTSL54GS supports advanced security features that help protect users' data and privacy. With WPA2 encryption, users can ensure that their wireless networks are secure from unauthorized access. The inclusion of a built-in firewall further enhances network security, making it harder for potential threats to infiltrate the system.

Another standout feature of the WRTSL54GS is its USB port, which allows for the connection of external storage devices. This capability enables file sharing among networked computers, making it convenient to access documents, photos, and multimedia content from multiple devices. Additionally, the USB support can facilitate print sharing, allowing users to connect a printer directly to the router.

Employing Quality of Service (QoS) technology, the WRTSL54GS can prioritize bandwidth for specific applications or devices. This ensures that high-demand activities, such as video streaming or online gaming, receive adequate bandwidth to function smoothly, enhancing the overall user experience.

Installation and configuration are straightforward thanks to the user-friendly web-based interface. Users can easily set up wireless security protocols, manage connected devices, and adjust settings to suit their preferences.

In summary, the Linksys WRTSL54GS combines reliable wireless capabilities, robust security features, and practical functionalities like USB support, making it a compelling choice for anyone looking to enhance their home or small office network. Its ease of use and scalability ensure that it remains a relevant solution even as network demands evolve. Overall, it provides a solid balance of performance and versatility.