Back Panel
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 12 |
RIGHT IN 4 | RIGHT IN 3 | RIGHT IN 2 | BALANCED | RIGHT OUT | LEFT OUT | BALANCED | LEFT IN 2 | LEFT IN 3 LEFT IN 4 | ||
|
|
| RIGHT IN 1 | RIGHT OUT |
|
| LEFT OUT | LEFT IN 1 |
|
|
RC5 |
RC5
WARNING THIS APPARATUS |
|
MUST BE EARTHED | PUSH |
RS232
OUT
SEE UNDERSIDE FOR SAFETY DETAILS 
|
|
| OUT | |
RS232 |
| PUSH | KNEKT | |
VOLTAGE RANGE | FUSE TYPE: | |||
IN | IN | |||
T800mA | ||||
|
|
IN
RCU
MAINS INPUT
1
2
3
4
5
6
RIGHT IN 4 – unbalanced input
RIGHT IN 3 – unbalanced input
RIGHT IN 2 – unbalanced input
RIGHT IN 1 – balanced xlr input
RIGHT OUT – balanced xlr output
RIGHT OUT – unbalanced output
| 13 | 14 15 16 17 | 18 |
13 | RS232 OUTPUT/INPUT – for operation of this product via | ||
14 | computer or |
| |
RC5 OUT – for control of this product in a KNEKT system | |||
15 | KNEKT IN – input for use in KNEKT system |
| |
16 | RCU – KNEKT Room Control Unit input |
| |
17 | RC5 IN - for control of this product in a KNEKT system | ||
18 | MAINS INPUT – global mains input (100V to 240V) | ||
7 | LEFT OUT – unbalanced output | |
8 | LEFT OUT – balanced xlr output | |
9 | LEFT IN 1 | – balanced xlr input |
10 | LEFT IN 2 | – unbalanced input |
11 | LEFT IN 3 | – unbalanced input |
12 | LEFT IN 4 – unbalanced input | |
The KLIMAX KONTROL should be put into standby mode then disconnected from the mains supply before connecting or disconnecting any of the plugs on the back panel. If this is not done you may generate surges which could damage the KLIMAX KONTROL or other components in your audio/AV system.
5
